• ULTRATUFF double border layout in Space Grey and Jet Black and Alpine White
    Package
1 1

ULTRATUFF Double Garage Floor Kit, Border Chequer Infill

ULTRATUFF Double Garage Floor Kit, Border Chequer Infill

In stock - ready to ship
$1,999
$2,325 $1,999
Save $326
Taxes included. Shipping calculated at checkout.

Border Chequer Infill layout on ULTRATUFF™ diamond-tread tiles. 240 tiles + 16 ULTRAEDGE ramps included. Details

Outer
Inner
Infill
Recommended By →
Aussie Garage Dadz Garage BadQ Garage Outlaw Garage Heath's Garage It's In The Detail
View full details

Transform your double garage with the ULTRATUFF™ Border Chequer Infill Floor Kit — a durable modular floor covering 36 m² (6 × 6 m). Each kit contains 240 tiles (225 floor tiles plus 15 spares) and 16 ULTRAEDGE ramps for a complete, drive-on-ready result.

  • Complete kit — a 6×6 m double garage floor in one box: 240 ULTRATUFF™ tiles (with 15 spares) and 16 ramps.
  • Border Chequer Infill — framed ULTRATUFF™ edges with a bold chequer pattern filling the enclosed centre.
  • Diamond-pattern traction — the solid ULTRATUFF™ surface provides steady grip while the raised diamonds shed surface moisture.
  • Low maintenance — the solid ULTRATUFF™ surface sweeps and mops effortlessly. Side channels maintain airflow beneath the floor.
  • 20t/m² load rating — every square metre of your ULTRATUFF™ Border Chequer Infill floor supports vehicles, jacks, and heavy equipment.
  • Full DIY install — the ULTRATUFF™ snap-lock system connects tiles by hand pressure alone. Finish a double garage in 4–6 hours.
  • Colour-stable and chemical-proof — UV-stabilised ULTRATUFF™ pigment holds true under prolonged sun. Oil, fuel, and brake fluid cause no damage.
  • Relocatable investment — every ULTRATUFF™ tile lifts out and travels with you. Damage one? Replace that single tile, not the whole floor.

Tested & Recommended by Aussies

Aussie Garage – YouTube cover

Phil from Aussie Garage Lays ULTRAGRID

Phil walks you through his ULTRAGRID™ DIY install in black, blue, and gray—and shows how easy it really is.

Read article
Dadz Garage featuring Sleek Space interlocking floor tiles

Dadz Garage

Watch Dadz Garage transform a cluttered space into a sleek haven with Sleek Space ULTRAGRID™ flooring.

Read article
It's In The Detail garage with Sleek Space interlocking tiles

It's In The Detail

See how It’s In The Detail transformed a dull, lifeless garage into a sleek and vibrant space.

Read article
Aussie Garage transformation featuring Sleek Space interlocking floor tiles

Aussie Garage

Aussie Garage recently transformed their space with Sleek Space ULTRATUFF tiles. See how they did it.

Read article
View all articles

Technical Specifications

Design Layout Border Chequer Infill
Tile Range ULTRATUFF
Total Tiles 240 (225 floor + 15 spares)
Front Ramps 16 ULTRAEDGE ramps
Floor Coverage 36 m² (standard 6 × 6 m double garage)
Surface Type Diamond-tread solid
Tile Size 400 × 400 × 18 mm
Load Rating 20 tonnes / m²
Material 100% Virgin Polypropylene
Installation Snap-lock click system, no adhesive
Estimated Install Time 4–6 hours
Compatibility All ULTRA Series tiles interlock
Temperature Range -40°C to +120°C
UV Stability Yes — colour-stable outdoors
Chemical Resistance Oil, fuel, brake fluid, solvents
It involves the most colour planning, but the physical installation is the same snap-lock process. Map the border, then alternate chequer tiles in the interior.
Three — one for the border, two for the chequer interior. Two colours also work if the border matches one of the chequer tones.
Yes. No adhesive means any tile can be lifted and repositioned. You can convert from chequer infill to plain, adjust the border width, or rearrange the entire layout.
No. Every tile — regardless of colour or position in the pattern — supports twenty tonnes per square metre. The chequer pattern is purely aesthetic; the structural performance is uniform.

Installation Guide

What you'll need

  • Tape measure
  • Rubber mallet
  • Jigsaw (for edge cuts)
  • Marker or pencil
  • Broom

Time estimate

  • Single garage (20-25 sqm): 4-6 hours
  • Double garage (40-50 sqm): 6-10 hours
  • No curing time — drive on immediately

Installation steps

  1. 1

    Start from the entrance

    Begin laying tiles at the garage door corner. Leave a 5–10mm expansion gap at all walls.

  2. 2

    Lay the first row

    Complete your first row across the garage, clicking tiles together. The interlocking pegs and loops do the work.

  3. 3

    Fit entrance ramps

    Attach ramp trims to the first row and slide the row snug against the garage door.

  4. 4

    Centre your design (optional)

    If your design has a centred pattern, adjust the first row to leave equal gaps on both sides.

  5. 5

    Lay remaining tiles

    Continue laying rows towards the back and side walls, clicking each tile into the previous one.

  6. 6

    Trim edges and finish

    Cut edge tiles with a jigsaw, click them in, and your floor is ready to use immediately — no curing time.

Shipping

Free shipping Australia-wide on all orders.

Orders are dispatched from our warehouses in Melbourne, Sydney, or Brisbane within 1-2 business days. We ship from the closest warehouse to you for fastest delivery.

Standard delivery typically takes 3-7 business days depending on your location. Express shipping available at checkout for metro areas.

Warehouse Pickup

Free pickup is available at our Sydney and Brisbane warehouses. Melbourne pickup is by appointment only. Select your preferred location at checkout.

Returns

We offer a 40-day hassle-free returns policy. If you are not completely satisfied with your purchase, contact our team and we will arrange a return. Items must be unused and in original packaging.

Warranty

All products come with an Australian replacement warranty covering manufacturing defects. If any product fails under normal use, we will replace it free of charge including shipping.