Finishing pieces for a tiled floor

The parts that finish the floor

Five things sit around the tiles. Ramps at the edges, covers for cables, strips that close the gap at the wall, channels that set a line of light into the floor, and the cutter that makes the perimeter quick.

Free Shipping
Australia-wide
Australian Warranty
Replacement, no shipping it back overseas
4.9/5 Rating
Rated by Australian customers
Expert Support
Real humans, real advice

Questions we get asked

Do I need ramps all the way around?

Usually not. Most floors only need female ramps across the front, where the floor meets the driveway. Sides that run into a wall need nothing. A double garage door at 4.8 m takes twelve ramps, which is three bags.

Do I have to cut tiles at the wall?

You can, and plenty of people do. The FC460 cutter shears a tile in one stroke and makes short work of a perimeter. If you would rather not cut, EXTENDER strips close the gap in 100 mm steps instead. Most floors end up using a bit of both.

Is the LED strip included in the channel kit?

No, and that is deliberate. The channel is 18 mm across inside, which takes any standard 8 or 10 mm strip, so you pick the colour and brightness you want. The kit is the four channels and the five frosted lids.

Will the colours match my floor?

Yes. Accessories are moulded in the same material and the same colours as the tiles, and they sit at the same 18 mm height, so everything lies flush.

Not sure what you need?

Design your floor and the accessories are worked out with it, or call the team and we will tell you what a garage your size actually takes. Free shipping Australia-wide.