• ULTRATUFF parking bay layout in Space Grey and Jet Black
    Package
1 1

ULTRATUFF Double Garage Floor Kit, Parking Bay Plain Infill

ULTRATUFF Double Garage Floor Kit, Parking Bay Plain Infill

In stock - ready to ship
$1,999
$2,325 $1,999
Save $326
Taxes included. Shipping calculated at checkout.

ULTRATUFF™ Parking Bay Plain Infill Floor Kit. 240 diamond-tread tiles + 16 ramps for a 6×6 m double garage. Details

Base
Outline
Infill
Recommended By →
Aussie Garage Dadz Garage BadQ Garage Outlaw Garage Heath's Garage It's In The Detail
View full details

The ULTRATUFF™ Parking Bay Plain Infill Floor Kit is a durable, versatile modular floor for a standard 6 × 6 m double garage. Inside the box you get 240 tiles (225 floor tiles plus 15 spares) and 16 ULTRAEDGE ramps — everything needed to transform bare concrete in a single afternoon.

  • Complete kit — everything for a 6×6 m double garage: 240 ULTRATUFF™ tiles (225 floor + 15 spares) and 16 ramps.
  • Parking Bay Plain Infill — colour-defined parking zones with a solid ULTRATUFF™ plain infill surrounding each bay.
  • Diamond-tread solid surface — the raised diamond pattern provides reliable grip under foot and tyre across the ULTRATUFF™ floor.
  • Low maintenance — side channels between ULTRATUFF™ tiles allow airflow at floor level. Sweep or mop for a spotless finish.
  • 20t/m² load rating — park cars, SUVs, utes, and workshop equipment on your ULTRATUFF™ Parking Bay Plain Infill floor with complete confidence.
  • Full DIY install — click ULTRATUFF™ tiles together by hand in 4–6 hours. No adhesive, no trades, no curing. Drive on immediately.
  • Built for Australian conditions — 100% virgin polypropylene, UV-stabilised. Resists oil, fuel, brake fluid, and solvents. Rated −40°C to +120°C.
  • Portable and replaceable — lift the floor and take it with you if you move. Swap a single damaged tile without disturbing the rest of your Parking Bay Plain Infill layout.

Tested & Recommended by Aussies

Aussie Garage – YouTube cover

Phil from Aussie Garage Lays ULTRAGRID

Phil walks you through his ULTRAGRID™ DIY install in black, blue, and gray—and shows how easy it really is.

Read article
Dadz Garage featuring Sleek Space interlocking floor tiles

Dadz Garage

Watch Dadz Garage transform a cluttered space into a sleek haven with Sleek Space ULTRAGRID™ flooring.

Read article
It's In The Detail garage with Sleek Space interlocking tiles

It's In The Detail

See how It’s In The Detail transformed a dull, lifeless garage into a sleek and vibrant space.

Read article
Aussie Garage transformation featuring Sleek Space interlocking floor tiles

Aussie Garage

Aussie Garage recently transformed their space with Sleek Space ULTRATUFF tiles. See how they did it.

Read article
View all articles

Technical Specifications

Design Layout Parking Bay Plain Infill
Tile Range ULTRATUFF
Total Tiles 240 (225 floor + 15 spares)
Front Ramps 16 ULTRAEDGE ramps
Floor Coverage 36 m² (standard 6 × 6 m double garage)
Surface Type Diamond-tread solid
Tile Size 400 × 400 × 18 mm
Load Rating 20 tonnes / m²
Material 100% Virgin Polypropylene
Installation Snap-lock click system, no adhesive
Estimated Install Time 4–6 hours
Compatibility All ULTRA Series tiles interlock
Temperature Range -40°C to +120°C
UV Stability Yes — colour-stable outdoors
Chemical Resistance Oil, fuel, brake fluid, solvents
Colour contrast. One colour outlines the parking bays, and a second colour fills the surrounding area. The visual boundary between the two creates clear, defined zones for each vehicle.
Yes. The modular tile system lets you place colour boundaries wherever you like. Adjust bay size, position, and spacing to fit your vehicles and garage layout.
Absolutely. Use one colour for the parking areas and a contrasting colour for the workshop zone. The snap-lock system adapts to any zoning arrangement.
The 16 ULTRAEDGE ramp pieces snap onto the exposed front edge of the tiles, creating a smooth slope from tile surface to driveway level. They are available in matching colours.

Installation Guide

What you'll need

  • Tape measure
  • Rubber mallet
  • Jigsaw (for edge cuts)
  • Marker or pencil
  • Broom

Time estimate

  • Single garage (20-25 sqm): 4-6 hours
  • Double garage (40-50 sqm): 6-10 hours
  • No curing time — drive on immediately

Installation steps

  1. 1

    Start from the entrance

    Begin laying tiles at the garage door corner. Leave a 5–10mm expansion gap at all walls.

  2. 2

    Lay the first row

    Complete your first row across the garage, clicking tiles together. The interlocking pegs and loops do the work.

  3. 3

    Fit entrance ramps

    Attach ramp trims to the first row and slide the row snug against the garage door.

  4. 4

    Centre your design (optional)

    If your design has a centred pattern, adjust the first row to leave equal gaps on both sides.

  5. 5

    Lay remaining tiles

    Continue laying rows towards the back and side walls, clicking each tile into the previous one.

  6. 6

    Trim edges and finish

    Cut edge tiles with a jigsaw, click them in, and your floor is ready to use immediately — no curing time.

Shipping

Free shipping Australia-wide on all orders.

Orders are dispatched from our warehouses in Melbourne, Sydney, or Brisbane within 1-2 business days. We ship from the closest warehouse to you for fastest delivery.

Standard delivery typically takes 3-7 business days depending on your location. Express shipping available at checkout for metro areas.

Warehouse Pickup

Free pickup is available at our Sydney and Brisbane warehouses. Melbourne pickup is by appointment only. Select your preferred location at checkout.

Returns

We offer a 40-day hassle-free returns policy. If you are not completely satisfied with your purchase, contact our team and we will arrange a return. Items must be unused and in original packaging.

Warranty

All products come with an Australian replacement warranty covering manufacturing defects. If any product fails under normal use, we will replace it free of charge including shipping.