Skip to product information
1 of11
Shop the Look

ULTRATONE Modular Floor Tile, Outback Red (16-Pack)

ULTRATONE Modular Floor Tile, Outback Red (16-Pack)

Backorder – 5 weeks
Regular price $144
Regular price Sale price $144
/pack

Covers 2.56m² · 16 tiles per pack

Taxes included. Shipping calculated at checkout.

ULTRATONE™ tiles in Outback Red. Smooth solid modular floor, DIY snap-lock install. Details

How many packs do I need?

Exact count for your area. Doing a custom design? Plan it in the designer

Quantity

Covers 2.56m²

Finish the edge

ULTRAEDGE ramps and corners

Sold in 4-packs of one type. Male, Female or Corner.

Choose type
View full details

Turn bare concrete into a warm, earthy Outback Red ULTRATONE™ floor in a single afternoon. A durable, versatile modular tile for garages, showrooms, workshops and commercial spaces. No adhesive, no trades, no curing.

  • Flat solid finish: the Outback Red surface is flat and smooth with a fine micro-texture, and the muted rust tone stays rich rather than loud.
  • Clean in minutes: the solid Outback Red surface sweeps and mops effortlessly. Side channels keep air moving beneath the floor.
  • 20-tonne load capacity: every square metre of your Outback Red floor supports vehicles, jacks and workshop equipment.
  • No adhesive, no trades: the snap-lock system connects tiles by hand pressure alone. Finish a double garage in four to six hours.
  • Colour-stable and chemical-proof: the Outback Red pigment is UV stabilised for Australian sun. Oil, fuel and brake fluid cause no damage.
  • Relocatable investment: every Outback Red tile lifts out and travels with you. Damage one? Replace that single tile, not the whole floor.

Technical Specifications

Colour Outback Red
Surface Flat micro-texture, no pattern (solid)
Tile Size 400 × 400 × 18 mm
Pack Size 16 tiles
Coverage per Pack 2.56 m²
Tiles per m² 6.25
Material 100% Virgin Polypropylene
Load Rating 20 tonnes / m²
Tile Type Solid, side channels for airflow
Temperature Range -40°C to +120°C
UV Stability UV stabilised for Australian sun
Chemical Resistance Oil, fuel, brake fluid, solvents
Installation Snap-lock click system, no adhesive
Compatibility All ULTRA Series tiles interlock
The Outback Red ULTRATONE™ tile is flat and smooth with a fine micro-texture for grip. There is no raised pattern, which is what gives it the cleanest and most understated look of any tile we make.
ULTRATONE™ is a solid tile. Nothing falls through the deck, and side channels keep air moving underneath. Water runs across the surface to the edges rather than draining through it.
The micro-texture across the face gives better slip resistance than wet concrete. On a solid tile water sits on the surface until it runs off, so squeegee any large spill rather than leaving it.
The load rating is twenty tonnes per square metre, which comfortably supports passenger cars, four-wheel drives, utes and workshop equipment. The Outback Red ULTRATONE™ tile distributes weight evenly across the interlocking grid.

Installation Guide

What you'll need

  • Tape measure
  • Rubber mallet
  • Jigsaw (for edge cuts)
  • Marker or pencil
  • Broom

Time estimate

  • Single garage (20-25 sqm): 4-6 hours
  • Double garage (40-50 sqm): 6-10 hours
  • No curing time — drive on immediately

Installation steps

  1. 1

    Start from the entrance

    Begin laying tiles at the garage door corner. Leave a 5–10mm expansion gap at all walls.

  2. 2

    Lay the first row

    Complete your first row across the garage, clicking tiles together. The interlocking pegs and loops do the work.

  3. 3

    Fit entrance ramps

    Attach ramp trims to the first row and slide the row snug against the garage door.

  4. 4

    Centre your design (optional)

    If your design has a centred pattern, adjust the first row to leave equal gaps on both sides.

  5. 5

    Lay remaining tiles

    Continue laying rows towards the back and side walls, clicking each tile into the previous one.

  6. 6

    Trim edges and finish

    Cut edge tiles with a jigsaw, click them in, and your floor is ready to use immediately — no curing time.

Shipping

Free shipping Australia-wide on all orders.

Orders are dispatched from our warehouses in Melbourne, Sydney, or Brisbane within 1-2 business days. We ship from the closest warehouse to you for fastest delivery.

Standard delivery typically takes 3-7 business days depending on your location. Express shipping available at checkout for metro areas.

Warehouse Pickup

Free pickup is available at our Sydney and Brisbane warehouses. Melbourne pickup is by appointment only. Select your preferred location at checkout.

Returns

We offer a 40-day hassle-free returns policy. If you are not completely satisfied with your purchase, contact our team and we will arrange a return. Items must be unused and in original packaging.

Warranty

All products come with an Australian replacement warranty covering manufacturing defects. If any product fails under normal use, we will replace it free of charge including shipping.