• ULTRARACK Power Tool Organiser with four drills hanging below two red steel shelves and screwdrivers in the side rack
    Sale
  • ULTRARACK Power Tool Organiser on a brick garage wall, four Ryobi drills hanging and the bit rack loaded
  • Milwaukee battery charger on the ULTRARACK Power Tool Organiser top shelf, cord running out the back
  • ULTRARACK Power Tool Organiser with a charger on top, two Milwaukee drills hanging and bits in the side rack
  • Drill bits standing in the ULTRARACK Power Tool Organiser side-mounted bit rack
  • ULTRARACK Power Tool Organiser holding four Milwaukee M18 drills and impact drivers on a workshop wall
  • ULTRARACK Power Tool Organiser front on, two red steel shelves above four tool slots
  • ULTRARACK Power Tool Organiser side profile showing the black steel side panel and bit rack
  • Empty two-plate bit rack on the side of the ULTRARACK Power Tool Organiser
  • Keyhole wall mount on the back corner of the ULTRARACK Power Tool Organiser
  • Underside of the ULTRARACK Power Tool Organiser showing a tool slot divider and the scalloped bottom plate
  • ULTRARACK Power Tool Organiser angled view showing the red shelves, four tool slots and side bit rack
  • ULTRARACK Power Tool Organiser dimensions, 43cm wide, 23cm deep, 30.5cm high
  • ULTRARACK Power Tool Organiser flat-pack contents, red shelves, black panels, dividers, Allen key and screws
1 14

ULTRARACK Power Tool Storage Organiser, Red

ULTRARACK Power Tool Storage Organiser, Red

Low stock - ready to ship
$79
$129 $79
Save $50
Taxes included. Shipping calculated at checkout.

Your drills, your charger and your bits, all on one bracket. Details

  • 4 slots for drills and drivers
  • 2 shelves for chargers and batteries
  • 1 rack for bits
Recommended By →
Aussie Garage Dadz Garage BadQ Garage Outlaw Garage Heath's Garage It's In The Detail
View full details

Four tools. Charged and off the bench.

Drills, impact drivers, circular saws, jigsaws, recip saws. Four hang under the shelf, charger on top, batteries where the tools are.

ULTRARACK Power Tool Storage Organiser seen front on: two red steel shelves, four tool slots beneath, and a bit rack down the left side
Two shelves, four tool slots, and a bit rack down the side.
Four tool slots
Drills, impact drivers and saws hang nose down, battery still on.
Two steel shelves
Charger on top. Tape, sockets and spare batteries under it.
Bit rack on the side
Two rows of holes for drill bits, driver bits and hex keys.
Hangs on two screws
Two keyhole mounts. Timber stud, concrete or steel frame.

Your drills end up on the bench, in the boot, or back in the case they came in. The charger is somewhere else. The bits are everywhere. This puts the lot on the wall, in one place, ready to pick up.

Four tools hang under the bottom shelf, nose down, with the battery still on. The charger sits on the top shelf with the cord running out the back, so the batteries charge where the tools live. The bit rack runs down the side.

Steel throughout, in red and black. It hangs on two keyhole mounts, into a stud, concrete or a steel frame.

Cordless drills, impact drivers, circular saws, jigsaws, reciprocating saws, and similar hand-held power tools. The shaped cradles accommodate a range of tool profiles and weights.
The organiser is designed with multiple cradle positions to accommodate different tool shapes. Arrange your power tools across the available positions based on the tools you own and how you prefer to access them.
The Power Tool Organiser is available in the Red finish shown. The colour adds a bold, workshop-accented look that stands out against darker garage walls and tile floors.

Installation Guide

What you'll need

  • Allen key, in the box
  • Drill
  • Level
  • Stud finder, for timber walls
  • Wall plugs to suit your wall

Installation steps

  1. 1

    Assemble it on the floor

    It ships flat. Eight steel panels, eleven screws and an Allen key, all in the box. Sides and bottom first, then the two shelves, then the three dividers.

  2. 2

    Choose your height

    Pick a spot where the tools hang clear of the bench and the charger cord can still reach a socket.

  3. 3

    Mark and drill

    Use a level to mark the two keyhole positions, then drill for the right fasteners for your wall.

  4. 4

    Hang it and load it

    Lift it onto the two screws. Tools nose down in the slots, charger on top, bits down the side.

Shipping

Free shipping Australia-wide on all orders.

Orders are dispatched from our warehouses in Melbourne, Sydney, or Brisbane within 1-2 business days. We ship from the closest warehouse to you for fastest delivery.

Standard delivery typically takes 3-7 business days depending on your location. Express shipping available at checkout for metro areas.

Warehouse Pickup

Free pickup is available at our Sydney and Brisbane warehouses. Melbourne pickup is by appointment only. Select your preferred location at checkout.

Returns

We offer a 40-day hassle-free returns policy. If you are not completely satisfied with your purchase, contact our team and we will arrange a return. Items must be unused and in original packaging.

Warranty

All products come with an Australian replacement warranty covering manufacturing defects. If any product fails under normal use, we will replace it free of charge including shipping.

What goes where

Four tools under the shelf, the charger on top, the bits down the side.

Four Milwaukee M18 drills and impact drivers hanging nose down in the ULTRARACK Power Tool Organiser, batteries attached
The four slotsOne tool per slot, nose down, battery still on. Shown holding four Milwaukee M18 tools.
A Milwaukee battery charger on the ULTRARACK Power Tool Organiser's top shelf with a tape measure and sockets on the shelf below
The shelvesCharger on top with the cord out the back. Tape, sockets and spare batteries on the shelf below.
Drill bits of assorted sizes standing in the ULTRARACK Power Tool Organiser's side-mounted bit rack
The bit rackTwo rows of holes down the side. Drill bits, driver bits and hex keys, on the same bracket as the drills.

Every measurement

Marked on the product, and written out beside it.

FRONT SIDE 43 cm 23 cm 30.5 cm4 tool slots 1.2 mm steel
Width
43 cm
Height
30.5 cm
Depth
23 cm
Tool slots
4
Shelves
2
Steel thickness
1.2 mm
Material
Carbon steel, powder coated
Colour
Red and black
Holds
Up to 40 kg, fixed to a solid wall
Weight, boxed
4.6 kg
Box
46.5 x 26 x 7 cm
Assembly
Ships flat, 8 panels, Allen key included
Mounts to
Timber stud, concrete, steel frame

Same wall, different job.

The rest of the ULTRARACK range.