• Sleek Space interlocking garage floor tile in grey
    Package
  • ULTRAFLUX single colour layout in Jet Black
  • ULTRAFLUX single colour layout in Space Grey
  • ULTRAFLUX single colour layout in Silver Grey
1 5

ULTRAFLUX Double Garage Floor Kit, Single Colour

ULTRAFLUX Double Garage Floor Kit, Single Colour

$1,999
$2,032 $1,999
Save $33
Taxes included. Shipping calculated at checkout.

ULTRAFLUX™ Single Colour Kit — durable modular floor covering a full 6×6 m double garage. Details

Colour
Recommended By →
Aussie Garage Dadz Garage BadQ Garage Outlaw Garage Heath's Garage It's In The Detail
View full details

This ULTRAFLUX™ Single Colour Floor Kit delivers a durable, versatile modular surface across a standard 6 × 6 m double garage. The kit includes 240 tiles (225 for the floor plus 15 spares for cuts and replacements) and 16 ULTRAEDGE ramps for a finished threshold.

  • Complete kit — 240 ULTRAFLUX™ tiles (225 floor + 15 spares) and 16 ULTRAEDGE ramps for a 6×6 m garage.
  • Single Colour — uniform ULTRAFLUX™ colour coverage for a sleek, uninterrupted garage floor.
  • Ventilated star design — the geometric ULTRAFLUX™ pattern creates depth and visual energy while allowing debris to drain through.
  • Low maintenance — the ULTRAFLUX™ top and side channels shed water and debris on contact. Vacuum or pressure wash for a thorough clean.
  • 20t/m² load rating — ULTRAFLUX™ tiles carry cars, utes, SUVs, and rolling toolboxes without flexing or cracking.
  • Full DIY install — lay ULTRAFLUX™ tiles wall to wall in 4–6 hours. The snap-lock system needs no glue, no experience, and no waiting.
  • Engineered for extremes — ULTRAFLUX™ tiles resist UV exposure, oil, fuel, and chemicals across −40°C to +120°C. Made from 100% virgin polypropylene.
  • Move house, move your floor — unclip tiles, stack them flat, and re-lay your Single Colour layout at a new address. Damaged tiles swap out individually.

Tested & Recommended by Aussies

Aussie Garage – YouTube cover

Phil from Aussie Garage Lays ULTRAGRID

Phil walks you through his ULTRAGRID™ DIY install in black, blue, and gray—and shows how easy it really is.

Read article
Dadz Garage featuring Sleek Space interlocking floor tiles

Dadz Garage

Watch Dadz Garage transform a cluttered space into a sleek haven with Sleek Space ULTRAGRID™ flooring.

Read article
It's In The Detail garage with Sleek Space interlocking tiles

It's In The Detail

See how It’s In The Detail transformed a dull, lifeless garage into a sleek and vibrant space.

Read article
Aussie Garage transformation featuring Sleek Space interlocking floor tiles

Aussie Garage

Aussie Garage recently transformed their space with Sleek Space ULTRATUFF tiles. See how they did it.

Read article
View all articles

Technical Specifications

Design Layout Single Colour
Tile Range ULTRAFLUX
Total Tiles 240 (225 floor + 15 spares)
Front Ramps 16 ULTRAEDGE ramps
Floor Coverage 36 m² (standard 6 × 6 m double garage)
Surface Type Geometric star pattern (ventilated)
Tile Size 400 × 400 × 18 mm
Load Rating 20 tonnes / m²
Material 100% Virgin Polypropylene
Installation Snap-lock click system, no adhesive
Estimated Install Time 4–6 hours
Compatibility All ULTRA Series tiles interlock
Temperature Range -40°C to +120°C
UV Stability Yes — colour-stable outdoors
Chemical Resistance Oil, fuel, brake fluid, solvents
A geometric angular design moulded into the surface of each tile. The star shapes interlock visually across the floor, catching light from multiple angles and creating a textured, three-dimensional appearance.
Yes — positively. The open channels between the star elements provide continuous ventilation and drainage. Water and debris pass through the surface rather than sitting on top.
Automatically. The snap-lock interlocking system positions each tile so the star pattern flows continuously from one tile to the next without alignment effort.
Absolutely. The UV-stabilised polypropylene and built-in drainage make ULTRAFLUX™ tiles well suited to carports, covered patios, and outdoor entertaining spaces.

Installation Guide

What you'll need

  • Tape measure
  • Rubber mallet
  • Jigsaw (for edge cuts)
  • Marker or pencil
  • Broom

Time estimate

  • Single garage (20-25 sqm): 4-6 hours
  • Double garage (40-50 sqm): 6-10 hours
  • No curing time — drive on immediately

Installation steps

  1. 1

    Start from the entrance

    Begin laying tiles at the garage door corner. Leave a 5–10mm expansion gap at all walls.

  2. 2

    Lay the first row

    Complete your first row across the garage, clicking tiles together. The interlocking pegs and loops do the work.

  3. 3

    Fit entrance ramps

    Attach ramp trims to the first row and slide the row snug against the garage door.

  4. 4

    Centre your design (optional)

    If your design has a centred pattern, adjust the first row to leave equal gaps on both sides.

  5. 5

    Lay remaining tiles

    Continue laying rows towards the back and side walls, clicking each tile into the previous one.

  6. 6

    Trim edges and finish

    Cut edge tiles with a jigsaw, click them in, and your floor is ready to use immediately — no curing time.

Shipping

Free shipping Australia-wide on all orders.

Orders are dispatched from our warehouses in Melbourne, Sydney, or Brisbane within 1-2 business days. We ship from the closest warehouse to you for fastest delivery.

Standard delivery typically takes 3-7 business days depending on your location. Express shipping available at checkout for metro areas.

Warehouse Pickup

Free pickup is available at our Sydney and Brisbane warehouses. Melbourne pickup is by appointment only. Select your preferred location at checkout.

Returns

We offer a 40-day hassle-free returns policy. If you are not completely satisfied with your purchase, contact our team and we will arrange a return. Items must be unused and in original packaging.

Warranty

All products come with an Australian replacement warranty covering manufacturing defects. If any product fails under normal use, we will replace it free of charge including shipping.